Ultrasonik Sensör Pepperl Fuchs UB800-18GM40A-U-V1
4 Aralık 2018
Ultrasonik Sensör Pepperl Fuchs UB800-F12-I-V15
4 Aralık 2018
Ultrasonik Sensör Pepperl Fuchs UB800-F12-EP-V15
Sensör
Ultrasonic Sensor
Ultrasonik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Ultrasonic Sensor
Pepperl Fuchs Ultrasonik Sensör
Pepperl Fuchs UB800-F12-EP-V15
Pepperl UB800-F12-EP-V15
Açıklama
Pepperl Fuchs UB800-F12-EP-V15 Ultrasonik Sensör
Pepperl UB800-F12-EP-V15 Ultrasonic Sensor
Teknik veriler UB800-F12-EP-V15
| Ürün Açıklaması |
| Single head system |
| General specifications | ||
| Sensing range | 30 … 800 mm | |
| Adjustment range | 50 … 800 mm | |
| Dead band | 0 … 30 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 310 kHz | |
| Response delay | approx. 100 ms | |
| Indicators/operating means | ||
| LED green | Operating display | |
| LED yellow | Evaluation range indicator, Ready for programming | |
| LED red | Ready for programming, Fault | |
| Electrical specifications | ||
| Operating voltage | 10 … 30 V DC | |
| No-load supply current | ≤ 30 mA | |
| Input/Output | ||
| Synchronization | 1 synchronous connection, bi-directional 0-level: -UB…+1 V 1-level: +4 V…+UB input impedance: > 12 kΩ synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
|
| Synchronization frequency | ||
| Common mode operation | max. 45 Hz | |
| Multiplex operation | ≤ 45/n Hz, n = number of sensors | |
| Input | ||
| Input type | 1 program input Switching distance 1: -UB … +1 V, Switching distance 2: +3 V … +UB Input impedance: > 10 kΩ |
|
| Pulse length | ≥ 1 s | |
| Output | ||
| Output type | Push-pull output, short-circuit protected, reverse polarity protected | |
| Rated operating current | 200 mA , short-circuit/overload protected | |
| Default setting | Switch point A1: 50 mm , Switch point A2: 800 mm , wide sound lobe | |
| Voltage drop | ≤ 3 V | |
| Repeat accuracy | ≤ 1 % | |
| Switching frequency | 6 Hz | |
| Range hysteresis | 1 % of the set operating distance | |
| Temperature influence | ± 1.5 % of full-scale value | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -15 … 70 °C (5 … 158 °F) | |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 5-pin | |
| Degree of protection | IP54 | |
| Material | ||
| Housing | Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC |
|
| Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT | |
| Mass | 60 g | |
