Ürünler

Sensör Pepperl+Fuchs
Endüktif Sensör Pepperl Fuchs NBN30-U1-E2-V1
2 Şubat 2019
Sensör Pepperl+Fuchs
Endüktif Sensör Pepperl Fuchs NBN30-U1-Z2
2 Şubat 2019
Tümünü Göster

Endüktif Sensör Pepperl Fuchs NBN30-U1-E3


Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBN30-U1-E3
Pepperl NBN30-U1-E3
NBN30-U1-E3

Açıklama

Pepperl Fuchs NBN30-U1-E3 Endüktif Sensör
Pepperl NBN30-U1-E3 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBN30-U1-E3
Pepperl Fuchs NBN30-U1-E3 Yakınlık Sensörü
Inductive Sensor NBN30-U1-E3 Pepperl-Fuchs
Endüktif Sensör NBN30-U1-E3 Pepperl-Fuchs

Teknik veriler NBN30-U1-E3

General specifications
Switching function Normally closed (NC)
Output type PNP
Rated operating distance 30 mm
Installation non-flush
Output polarity DC
Assured operating distance 0 … 24.3 mm
Actual operating distance 27 … 33 mm typ. 30 mm
Reduction factor rAl 0.33
Reduction factor rCu 0.31
Reduction factor r304 0.74
Reduction factor rBrass 0.38
Output type 3-wire
Nominal ratings
Operating voltage 10 … 30 V
Switching frequency 0 … 230 Hz
Hysteresis typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Voltage drop ≤ 2 V
Operating current 0 … 200 mA
Off-state current 0 … 0.5 mA typ. 0.01 mA
Off-state current TU =40 °C, switching element off ≤ 100 µA
No-load supply current ≤ 20 mA
Time delay before availability ≤ 50 ms
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 1980 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature -25 … 85 °C (-13 … 185 °F)
Mechanical specifications
Connection type screw terminals
Core cross-section max. 2.5 mm2
Housing material PA/metal with epoxy powder coating
Sensing face PA
Housing base plastic
Degree of protection IP68 / IP69K
Mass 225 g
Note Tightening torque: 1.8 Nm (housing)
Tightening torque: 1.0 Nm (Screw terminal)