Manyetik Alan Sensörü Pepperl Fuchs MB80-12GM50-E0-PUR
Manyetik Alan Sensörü Pepperl Fuchs MC60-12GM50-1N-V1
Manyetik Alan Sensörü Pepperl Fuchs MC60-12GM50-1N
Sensör
Manyetik Alan Sensörü
Magnetic Field Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Manyetik Alan Sensörü
Pepperl Fuchs Magnetic Field Sensor
Pepperl Fuchs MC60-12GM50-1N
Pepperl MC60-12GM50-1N
MC60-12GM50-1N
Açıklama
Pepperl Fuchs MC60-12GM50-1N Manyetik Alan Sensörü
Pepperl MC60-12GM50-1N Magnetic Field Sensor
Yaklaşım Sensörü Pepperl Fuchs MC60-12GM50-1N
Pepperl Fuchs MC60-12GM50-1N Yakınlık Sensörü
Magnetic Field Sensor MC60-12GM50-1N Pepperl-Fuchs
Manyetik Alan Sensörü MC60-12GM50-1N Pepperl-Fuchs
Teknik veriler MC60-12GM50-1N
| General specifications | ||
| Switching function | Normally open (NO) | |
| Output type | NAMUR | |
| Rated operating distance | 60 mm | |
| Installation | flush in non-magnetic metal | |
| Assured operating distance | 10 … 48.6 mm | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 … 5000 Hz | |
| Current consumption | ||
| Magnet detected | ≥ 2.5 mA | |
| Magnet not detected | ≤ 1 mA | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 4382 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 | |
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
| Approvals and certificates | ||
| FM approval | ||
| Control drawing | 116-0165 | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
| Mechanical specifications | ||
| Connection type | cable PVC , 2 m | |
| Core cross-section | 0.34 mm2 | |
| Housing material | stainless steel 1.4404 / AISI 316L | |
| Sensing face | stainless steel 1.4404 / AISI 316L | |
| Degree of protection | IP66 / IP67 | |
| Equipment protection level Gb | ||
| CE marking | [*PD-Z02585A*] | |
| ATEX marking | II 2G Ex ib IIC T6 Gb | |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012 Ignition protection “Intrinsic safety” Use is restricted to the following stated conditions | |
| Appropriate type | MC60-12GM50-1N | |
| Effective internal inductivity | max. 15 nF ; a cable length of 10 m is considered. | |
| Effective internal inductance | max. 35 µH ; a cable length of 10 m is considered. | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
| Category | 2G | |
