Endüktif Sensör Pepperl Fuchs NBB10-30GM100-E2-Y233378
Endüktif Sensör Pepperl Fuchs NBB10-30GM40-E2
Endüktif Sensör Pepperl Fuchs NBB10-30GM30-E0-T-V1-Y263235
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBB10-30GM30-E0-T-V1-Y263235
Pepperl NBB10-30GM30-E0-T-V1-Y263235
NBB10-30GM30-E0-T-V1-Y263235
Açıklama
Pepperl Fuchs NBB10-30GM30-E0-T-V1-Y263235 Endüktif Sensör
Pepperl NBB10-30GM30-E0-T-V1-Y263235 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBB10-30GM30-E0-T-V1-Y263235
Pepperl Fuchs NBB10-30GM30-E0-T-V1-Y263235 Yakınlık Sensörü
Inductive Sensor NBB10-30GM30-E0-T-V1-Y263235 Pepperl-Fuchs
Endüktif Sensör NBB10-30GM30-E0-T-V1-Y263235 Pepperl-Fuchs
Teknik veriler NBB10-30GM30-E0-T-V1-Y263235
| General specifications | ||
| Switching function | Normally open (NO) | |
| Output type | NPN | |
| Rated operating distance | 10 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Assured operating distance | 0 … 8.1 mm | |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 30 mm x 30 mm x 1 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.7 | |
| Reduction factor rBrass | 0.4 | |
| Nominal ratings | ||
| Installation conditions | ||
| B | 25 mm | |
| C | 16 mm | |
| F | 37 mm | |
| Operating voltage | 10 … 30 V | |
| Switching frequency | 0 … 300 Hz | |
| Hysteresis | 0.05 … 2.2 mm | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Overload resistance | yes | |
| Wire breakage protection | yes | |
| Inductive overvoltage protection | yes | |
| Surge suppression | yes | |
| Ripple | 10 % | |
| Voltage drop | ≤ 2.5 V | |
| Repeat accuracy | 0.3 mm | |
| Operating current | 0 … 200 mA up to 85 °C, above this temperature max 150 mA | |
| Off-state current | ≤ 0.01 mA | |
| No-load supply current | ≤ 7 mA | |
| Switching state indicator | Multihole-LED, yellow | |
| Functional safety related parameters | ||
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Ambient conditions | ||
| Ambient temperature | -25 … 100 °C (-13 … 212 °F) | |
| Storage temperature | -40 … 100 °C (-40 … 212 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 3-pin | |
| Housing material | brass, nickel-plated | |
| Sensing face | PBT | |
| Housing diameter | 30 mm | |
| Degree of protection | IP67 | |
| Mass | 80 g | |
| General information | ||
| Note | The sensor can be operated at ambient temperatures of up to 120 °C for short periods (<30 minutes). In such cases, the output load capacity drops to 100 mA. | |
