Endüktif Sensör Pepperl Fuchs NBB8-18GM50-E2-M-Y257916
Endüktif Sensör Pepperl Fuchs NBB8-18GM50-E2-M1
Endüktif Sensör Pepperl Fuchs NBB8-18GM50-E2-M-Y266288
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBB8-18GM50-E2-M-Y266288
Pepperl NBB8-18GM50-E2-M-Y266288
NBB8-18GM50-E2-M-Y266288
Açıklama
Pepperl Fuchs NBB8-18GM50-E2-M-Y266288 Endüktif Sensör
Pepperl NBB8-18GM50-E2-M-Y266288 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBB8-18GM50-E2-M-Y266288
Pepperl Fuchs NBB8-18GM50-E2-M-Y266288 Yakınlık Sensörü
Inductive Sensor NBB8-18GM50-E2-M-Y266288 Pepperl-Fuchs
Endüktif Sensör NBB8-18GM50-E2-M-Y266288 Pepperl-Fuchs
Teknik veriler NBB8-18GM50-E2-M-Y266288
| General specifications | |
| Switching function | Normally open (NO) |
| Output type | PNP |
| Rated operating distance | 8 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 … 6.48 mm |
| Reduction factor rAl | 0.45 |
| Reduction factor rCu | 0.4 |
| Reduction factor r304 | 0.7 |
| Nominal ratings | |
| Operating voltage | 10 … 30 V |
| Switching frequency | 0 … 400 Hz |
| Hysteresis | typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 2.5 V |
| Operating current | 0 … 200 mA |
| Off-state current | 0 … 0.5 mA typ. 0.1 µA at 25 °C |
| No-load supply current | ≤ 10 mA |
| Switching state indicator | all direction LED, yellow |
| Functional safety related parameters | |
| MTTFd | 2070 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Approvals and certificates | |
| UL approval | cULus Listed, General Purpose |
| E1 Type approval | 10R-04 |
| Ambient conditions | |
| Ambient temperature | -40 … 85 °C (-40 … 185 °F) |
| Mechanical specifications | |
| Connection type | Cable connector PUR , L = 0.6 m |
| Connection assembly | AMP housing 282105-1 AMP connector type 282109-1 AMP sealing 281934-2 |
| Core cross-section | 0.75 mm2 |
| Housing material | brass, nickel-plated |
| Sensing face | PBT |
| Housing diameter | 18 mm |
| Degree of protection | IP68 / IP69K |
