Endüktif Güç Kelepçe Sensörü Pepperl Fuchs NBN2-F581-160S6-E8-V1
Endüktif Güç Kelepçe Sensörü Pepperl Fuchs NBN2-F581-80S3-E8-V1
Endüktif Güç Kelepçe Sensörü Pepperl Fuchs NBN2-F581-200S6-E8-V1
Sensör
Inductive Power Clamp Sensor
Endüktif Güç Kelepçe Sensörü
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Inductive Power Clamp Sensor
Pepperl Fuchs Endüktif Güç Kelepçe Sensörü
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NBN2-F581-200S6-E8-V1
Pepperl NBN2-F581-200S6-E8-V1
NBN2-F581-200S6-E8-V1
Pepperl Fuchs NBN2-F581-200S6-E8-V1 Endüktif Sensör
Pepperl NBN2-F581-200S6-E8-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NBN2-F581-200S6-E8-V1
Pepperl Fuchs NBN2-F581-200S6-E8-V1 Yakınlık Sensörü
Inductive Power Clamp Sensor NBN2-F581-200S6-E8-V1 Pepperl-Fuchs
Endüktif Güç Kelepçe Sensörü NBN2-F581-200S6-E8-V1 Pepperl-Fuchs
Teknik veriler NBN2-F581-200S6-E8-V1
| Ürün Açıklaması |
| General specifications | ||
| Switching function | 2 x normally open (NO) | |
| Output type | PNP | |
| Rated operating distance | 2 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 … 1.62 mm | |
| Reduction factor rAl | 0.45 | |
| Reduction factor rCu | 0.35 | |
| Reduction factor r304 | 0.75 | |
| Output type | 4-wire | |
| Nominal ratings | ||
| Operating voltage | 10 … 30 V DC | |
| Switching frequency | 0 … 25 Hz | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 3 V | |
| Operating current | 0 … 100 mA | |
| Off-state current | ≤ 10 µA | |
| No-load supply current | ≤ 15 mA | |
| Constant magnetic field | 100 mT | |
| Alternating magnetic field | 100 mT | |
| Functional safety related parameters | ||
| MTTFd | 1445 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| LED POWER | LED, green | |
| Switching state | “Closed” = LED red (S02)/C “Open” = LED yellow (S01)/O | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 | |
| Approvals and certificates | ||
| UL approval | UL Recognized | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 4-pin | |
| Flexible lead, housing-sensor | (200 ± 5) mm, PUR (halogen-free) | |
| Housing material | amplifier; PBT, PA6 + GD-ZN AL4 oscillators; PBT | |
| Degree of protection | IP65 | |
