Endüktif Sensör Pepperl Fuchs NJ40-FP-SN-B1-P1-Y024207
Endüktif Sensör Pepperl Fuchs NJ40-FP-SN-P4
Endüktif Sensör Pepperl Fuchs NJ40-FP-SN-P1
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NJ40-FP-SN-P1
Pepperl NJ40-FP-SN-P1
NJ40-FP-SN-P1
Açıklama
Pepperl Fuchs NJ40-FP-SN-P1 Endüktif Sensör
Pepperl NJ40-FP-SN-P1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NJ40-FP-SN-P1
Pepperl Fuchs NJ40-FP-SN-P1 Yakınlık Sensörü
Inductive Sensor NJ40-FP-SN-P1 Pepperl-Fuchs
Endüktif Sensör NJ40-FP-SN-P1 Pepperl-Fuchs
Teknik veriler NJ40-FP-SN-P1
| General specifications | ||
| Switching function | Normally closed (NC) | |
| Output type | NAMUR with safety function | |
| Rated operating distance | 40 mm | |
| Installation | non-flush | |
| Assured operating distance | 0 … 32.4 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Safety Integrity Level (SIL) | up to SIL3 acc. to IEC 61508 Danger! In safety-related applications the sensor must be operated with a qualified fail safe interface from Pepperl+Fuchs, such as KFD2-SH-EX1. Consider the “exida Functional Safety Assessment” document which is available on www.pepperl-fuchs.com as an integral part of this product’s documentation. | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 … 100 Hz | |
| Current consumption | ||
| Measuring plate not detected | ≥ 3 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| MTTFd | 7560 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
