Endüktif Sensör Pepperl Fuchs NMB10-18GH50-E2
Endüktif Sensör Pepperl Fuchs NMB10-18GM55-E0
Endüktif Sensör Pepperl Fuchs NMB10-18GH50-E2-V1
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NMB10-18GH50-E2-V1
Pepperl NMB10-18GH50-E2-V1
NMB10-18GH50-E2-V1
Açıklama
Pepperl Fuchs NMB10-18GH50-E2-V1 Endüktif Sensör
Pepperl NMB10-18GH50-E2-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NMB10-18GH50-E2-V1
Pepperl Fuchs NMB10-18GH50-E2-V1 Yakınlık Sensörü
Inductive Sensor NMB10-18GH50-E2-V1 Pepperl-Fuchs
Endüktif Sensör NMB10-18GH50-E2-V1 Pepperl-Fuchs
Teknik veriler NMB10-18GH50-E2-V1
| General specifications | ||
| Switching function | Normally open (NO) | |
| Output type | PNP | |
| Rated operating distance | 10 mm | |
| Installation | flush in mild steel | |
| Output polarity | DC | |
| Assured operating distance | 0 … 8.1 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.25 | |
| Reduction factor r304 | 0.5 (0.9 of material thickness 2 mm) | |
| Reduction factor rSt37 | 1 | |
| Output type | 3-wire | |
| Nominal ratings | ||
| Installation conditions | ||
| A | 0 mm | |
| B | 16 mm | |
| C | 30 mm | |
| F | 60 mm | |
| Operating voltage | 10 … 30 V | |
| Switching frequency | 0 … 300 Hz | |
| Hysteresis | 3 … 15 typ. 5 % | |
| Reverse polarity protection | yes | |
| Short-circuit protection | yes | |
| Voltage drop | ≤ 2 V | |
| Operating current | 0 … 200 mA | |
| Off-state current | ≤ 0.1 mA | |
| No-load supply current | ≤ 10 mA | |
| Switching state indicator | LED, yellow | |
| Limit data | ||
| Operating pressure statically | 60 bar (870.2 psi) max. | |
| Functional safety related parameters | ||
| MTTFd | 655 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 … 85 °C (-13 … 185 °F) | |
| Mechanical specifications | ||
| Connection type | Connector plug M12 x 1 , 4-pin | |
| Housing material | Stainless steel 1.4435 / AISI 316L | |
| Sensing face | Stainless steel 1.4435 / AISI 316L | |
| Degree of protection | IP68 / IP69K | |
| Mass | 24 g | |
