Endüktif Sensör Pepperl Fuchs NMB2-12GM55-E2-FE
Endüktif Sensör Pepperl Fuchs NMB2-12GM65-E0-NFE-V1
Endüktif Sensör Pepperl Fuchs NMB2-12GM65-E0-FE-V1
Sensör
Yakınlık Sensörü
Proximity Sensor
Endüktif Proximity Sensör
Inductive Proximity Sensor
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Proximity Sensor
Pepperl Fuchs Yakınlık Sensörü
Pepperl Fuchs Endüktif Proximity Sensör
Pepperl Fuchs Inductive Proximity Sensor
Pepperl Fuchs NMB2-12GM65-E0-FE-V1
Pepperl NMB2-12GM65-E0-FE-V1
NMB2-12GM65-E0-FE-V1
Açıklama
Pepperl Fuchs NMB2-12GM65-E0-FE-V1 Endüktif Sensör
Pepperl NMB2-12GM65-E0-FE-V1 Inductive Sensor
Yaklaşım Sensörü Pepperl Fuchs NMB2-12GM65-E0-FE-V1
Pepperl Fuchs NMB2-12GM65-E0-FE-V1 Yakınlık Sensörü
Inductive Sensor NMB2-12GM65-E0-FE-V1 Pepperl-Fuchs
Endüktif Sensör NMB2-12GM65-E0-FE-V1 Pepperl-Fuchs
Teknik veriler NMB2-12GM65-E0-FE-V1
| General specifications | |
| Switching function | Normally open (NO) |
| Output type | NPN |
| Rated operating distance | 2 mm |
| Installation | flush |
| Output polarity | DC |
| Assured operating distance | 0 … 1.62 mm |
| Actuating element | Ferrous targets |
| Reduction factor rAl | 0 |
| Reduction factor rCu | 0 |
| Reduction factor r304 | 0.6 – 0.8 |
| Reduction factor r316Ti | 0.1 |
| Reduction factor rSt37 | 1 |
| Reduction factor rBrass | 0 |
| Nominal ratings | |
| Operating voltage | 10 … 30 V DC |
| Switching frequency | 100 Hz |
| Hysteresis | 3 … 15 typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 2 V DC |
| Operating current | ≤ 200 mA |
| Current consumption | < 14 mA |
| Off-state current | ≤ 10 µA |
| Functional safety related parameters | |
| MTTFd | 990 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means | |
| Operation indicator | 4-way dual LED Green: power Yellow: output |
| Approvals and certificates | |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions | |
| Ambient temperature | -40 … 70 °C (-40 … 158 °F) |
| Mechanical specifications | |
| Connection type | V1 connector (M12 x 1), 4-pin |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Sensing face | Stainless steel 1.4305 / AISI 303 |
| Housing diameter | 12 mm |
| Degree of protection | IP67 / IP68 / IP69K – cordset dependent according to cable specification |
