Ürünler

Pepperl Ultrasonik Sensörler
Karşılıklı Tip Fotoelektrik Sensör Pepperl Fuchs LD28/LV28-F1/49/76a/82b/105
Ultrasonic Sensor Pepperl Fuchs
Karşılıklı Tip Fotoelektrik Sensör Pepperl Fuchs LD28/LV28-F1/76a/82b/105/110
Tümünü Göster

Karşılıklı Tip Fotoelektrik Sensör Pepperl Fuchs LD28/LV28-F1/49/76a/82b/115

Sensör
Fotoelektrik Sensör
Thru-beam Sensor
Karşılıklı Tip Fotoelektrik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Thru-beam Sensor
Pepperl Fuchs Karşılıklı Tip Fotoelektrik Sensör
Pepperl Fuchs LD28/LV28-F1/49/76a/82b/115
Pepperl LD28/LV28-F1/49/76a/82b/115
LD28/LV28-F1/49/76a/82b/115

Açıklama

Pepperl Fuchs LD28/LV28-F1/49/76a/82b/115 Karşılıklı Tip Fotoelektrik Sensör
Pepperl LD28/LV28-F1/49/76a/82b/115 Thru-beam Sensor
Fotoelektrik Sensör Pepperl Fuchs LD28/LV28-F1/49/76a/82b/115
Pepperl Fuchs LD28/LV28-F1/49/76a/82b/115 Fotoelektrik Sensör
Thru-beam Sensor LD28/LV28-F1/49/76a/82b/115 Pepperl-Fuchs
Karşılıklı Tip Fotoelektrik Sensör LD28/LV28-F1/49/76a/82b/115 Pepperl-Fuchs

Teknik veriler LD28/LV28-F1/49/76a/82b/115

Ürün Açıklaması
Universal thru-beam sensor, large housing design, 30 m detection range, red light, 25 kHz transmission frequency, light/dark on, DC version, NPN output, PNP output, test input, pre-fault output, fixed cable

 

System components
EmitterLD28-F1/76a/115
ReceiverLV28-F1/49/82b/115
General specifications
Effective detection range0 … 30 m
Threshold detection range40 m
Light sourceLED
Light typemodulated visible red light , 660 nm
Alignment aidLED red (in receiver lens)
illuminated constantly: beam is interrupted,
flashes: reaching switching point,
off: sufficient stability control
Transmitter frequencyF1 = 25 kHz
Diameter of the light spotapprox. 0.6 m at 30 m
Angle of divergenceEmitter 1.2°,
Receiver 5°
Ambient light limit50000 Lux
Functional safety related parameters
MTTFd620 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)90 %
Indicators/operating means
Operation indicatorLED green
Function indicatorLED yellow:
1. LED lit constantly: signal > 2 x switching point (function reserve)
2. LED flashes: signal between 1 x switching point and 2 x switching point
3. LED off: signal < switching point
Control elementssensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch
Electrical specifications
Operating voltage10 … 30 V DC
Ripple10 %
No-load supply currentEmitter: ≤ 50 mA
Receiver: ≤ 35 mA
Input
Test inputemitter deactivation at +UB (Imax. < 3 mA at 30 V DC)
Output
Pre-fault indication output1 PNP transistor, short-circuit protected, protected from reverse polarity, open collector, Umax = 30 V DC, Imax = 0.2 A
The output becomes inactive if the signal level has fallen below the function reserve for approx. 10 s (yellow and red LEDs flash).
If the light beam is interrupted four times during this period, the output immediately becomes inactive.
Switching typelight/dark on, switchable
Signal output1 NPN, 1 PNP synchronized-switching, short-circuit protected, reverse polarity protected , open collectors
Switching voltagemax. 30 V DC
Switching currentmax. 200 mA
Switching frequency1000 Hz
Response time0.5 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
Protection classII, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
UL approvalcULus Listed , Class 2 power source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-40 … 60 °C (-40 … 140 °F)
Storage temperature-40 … 75 °C (-40 … 167 °F)
Mechanical specifications
Housing width25.8 mm
Housing height88 mm
Housing depth54.3 mm
Degree of protectionIP67
Connection2.5 m, 5-wire, fixed cable, Euronorm
Material
HousingPlastic ABS
Optical facePlastic pane
Mass500 g (emitter and receiver)
Top