Cisimden Yansımalı Fotoelektrik Sensör Pepperl Fuchs ML100-8-1000-RT/103/115
Cisimden Yansımalı Fotoelektrik Sensör Pepperl Fuchs ML100-8-1000-RT/95/102
Cisimden Yansımalı Fotoelektrik Sensör Pepperl Fuchs ML100-8-1000-RT/103/115b
Sensör
Fotoelektrik Sensör
Diffuse Mode Sensor
Cisimden Yansımalı Fotoelektrik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Diffuse Mode Sensor
Pepperl Fuchs Cisimden Yansımalı Fotoelektrik Sensör
Pepperl Fuchs ML100-8-1000-RT/103/115b
Pepperl ML100-8-1000-RT/103/115b
ML100-8-1000-RT/103/115b
Açıklama
Pepperl Fuchs ML100-8-1000-RT/103/115b Cisimden Yansımalı Fotoelektrik Sensör
Pepperl ML100-8-1000-RT/103/115b Diffuse Mode Sensor
Fotoelektrik Sensör Pepperl Fuchs ML100-8-1000-RT/103/115b
Pepperl Fuchs ML100-8-1000-RT/103/115b Fotoelektrik Sensör
Diffuse Mode Sensor ML100-8-1000-RT/103/115b Pepperl-Fuchs
Cisimden Yansımalı Fotoelektrik Sensör ML100-8-1000-RT/103/115b Pepperl-Fuchs
Teknik veriler ML100-8-1000-RT/103/115b
| Ürün Açıklaması |
| Diffuse mode sensor, plastic housing, 1000 mm adjustable detection range, red light, light/dark on, PNP output, fixed cable with M12 plug |
| General specifications | ||
| Detection range | 0 … 1000 mm | |
| Adjustment range | 100 … 1000 mm | |
| Reference target | standard white, 100 mm x 100 mm | |
| Light source | LED | |
| Light type | modulated visible red light | |
| Polarization filter | no | |
| Diameter of the light spot | approx. 75 mm at a distance of 1000 mm | |
| Angle of divergence | approx. 2 ° | |
| Optical face | frontal | |
| Ambient light limit | EN 60947-5-2:2007+A1:2012 | |
| Functional safety related parameters | ||
| MTTFd | 860 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green: power on | |
| Function indicator | LED yellow, lights up with receiver lit | |
| Control elements | sensitivity adjustment | |
| Control elements | Light-on/dark-on changeover switch | |
| Electrical specifications | ||
| Operating voltage | 10 … 30 V DC | |
| Ripple | max. 10 % | |
| No-load supply current | < 20 mA | |
| Output | ||
| Switching type | The switching type of the sensor is adjustable. The default setting is: light on | |
| Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA , resistive load | |
| Voltage drop | ≤ 1.5 V DC | |
| Switching frequency | 1000 Hz | |
| Response time | 0.5 ms | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2 | |
| Standard conformity | ||
| Standards | UL 60947-5-2 | |
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -30 … 60 °C (-22 … 140 °F) | |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) | |
| Mechanical specifications | ||
| Housing width | 11 mm | |
| Housing height | 31 mm | |
| Housing depth | 20 mm | |
| Degree of protection | IP67 | |
| Connection | 300 mm fixed cable with 4-pin, M12 x 1 connector | |
| Material | ||
| Housing | PC (Polycarbonate) | |
| Optical face | PMMA | |
| Mass | approx. 50 g | |
| Cable length | 0.3 m | |
