Fiber Optik Sensör Pepperl Fuchs SU18-40a/102/115/126a
Fiber Optik Sensör Pepperl Fuchs SU18-40a/110/115/123
Fiber Optik Sensör Pepperl Fuchs SU18-40a/102/115a/123
Sensör
Fotoelektrik Sensör
Fiber Optic Sensor
Fiber Optik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Fiber Optic Sensor
Pepperl Fuchs Fiber Optik Sensör
Pepperl Fuchs SU18-40a/102/115a/123
Pepperl SU18-40a/102/115a/123
SU18-40a/102/115a/123
Açıklama
Pepperl Fuchs SU18-40a/102/115a/123 Fiber Optik Sensör
Pepperl SU18-40a/102/115a/123 Fiber Optic Sensor
Fotoelektrik Sensör Pepperl Fuchs SU18-40a/102/115a/123
Pepperl Fuchs SU18-40a/102/115a/123 Fotoelektrik Sensör
Fiber Optic Sensor SU18-40a/102/115a/123 Pepperl-Fuchs
Fiber Optik Sensör SU18-40a/102/115a/123 Pepperl-Fuchs
Teknik veriler SU18-40a/102/115a/123
| Ürün Açıklaması |
| Fiber optic sensor for glass fiber optic and plastic fiber optic, slim design, range up to 450 mm, red light, 3 response times available, external Teach-in, light/dark on, 1 NPN output, fixed cable with M8 plug |
| General specifications | ||
| Sensor range | up to 150 mm (KLR-C02-2,2-2,0-K146) | |
| Detection range | up to 450 mm (KLE-C01-2,2-2,0-K116) | |
| Light source | LED | |
| Light type | modulated visible red light , 660 nm | |
| Ambient light limit | 10000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 690 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz) | |
| Function indicator | LED yellow: static illumination switching state, flashes when falling short of the stability control | |
| Control elements | Teach-In key slide switch 2 positions: light/dark switching slide switch 3 positions: timer function – timer off, on delay 40 ms, off-delay 40 ms slide switch 3 positions: operating mode – normal, high speed , high resolution | |
| Electrical specifications | ||
| Operating voltage | 10 … 30 V DC | |
| Ripple | 10 % | |
| No-load supply current | ≤ 30 mA | |
| Input | ||
| Function input | external Teach-In | |
| Output | ||
| Pre-fault indication output | 1 NPN, short-circuit protected open collector | |
| Switching type | light/dark on, switchable | |
| Signal output | 1 NPN, short-circuit protected open collector | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA , resistive load | |
| Voltage drop | ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA | |
| Switching frequency | Standard mode: 3 kHz , High speed mode: 6 kHz , High resolution: 500 Hz | |
| Response time | Standard mode: 160 µs , High speed mode: 80 µs , High resolution: 1 ms | |
| Repeat accuracy | ≤ 0.5 % of adjusted sensor range | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -10 … 55 °C (14 … 131 °F) | |
| Storage temperature | -20 … 70 °C (-4 … 158 °F) | |
| Mechanical specifications | ||
| Housing width | 9 mm | |
| Housing height | 34.5 mm | |
| Housing depth | 62.3 mm | |
| Degree of protection | IP50 | |
| Connection | 200 mm, PVC cable with M8 connector, 4-pin | |
| Material | ||
| Housing | PC | |
| Mass | 45 g | |
