Fiber Optik Sensör Pepperl Fuchs SU19/82a/103/115
Fiber Optik Sensör Pepperl Fuchs VL18LL-M/32/40a/118
Fiber Optik Sensör Pepperl Fuchs VL18LL-M/30/40a/118
Sensör
Fotoelektrik Sensör
Fiber Optic Sensor
Fiber Optik Sensör
Pepperl Fuchs
Pepperl Fuchs Sensör
Pepperl Fuchs Fotoelektrik Sensör
Pepperl Fuchs Fiber Optic Sensor
Pepperl Fuchs Fiber Optik Sensör
Pepperl Fuchs VL18LL-M/30/40a/118
Pepperl VL18LL-M/30/40a/118
VL18LL-M/30/40a/118
Açıklama
Pepperl Fuchs VL18LL-M/30/40a/118 Fiber Optik Sensör
Pepperl VL18LL-M/30/40a/118 Fiber Optic Sensor
Fotoelektrik Sensör Pepperl Fuchs VL18LL-M/30/40a/118
Pepperl Fuchs VL18LL-M/30/40a/118 Fotoelektrik Sensör
Fiber Optic Sensor VL18LL-M/30/40a/118 Pepperl-Fuchs
Fiber Optik Sensör VL18LL-M/30/40a/118 Pepperl-Fuchs
Teknik veriler VL18LL-M/30/40a/118
| Ürün Açıklaması |
| Fiber optic sensor for glass fiber optics |
| General specifications | ||
| Sensor range | up to 70 mm (LMR 18-3,2-1,0-K4) | |
| Detection range | up to 300 mm (LME 18-2,3-0,5-K3) | |
| Light source | LED, 650 nm visible red light | |
| Light type | modulated visible red light | |
| Angle of divergence | 26 ° | |
| Optical face | frontal | |
| Ambient light limit | 30000 Lux | |
| Hysteresis | < 15 % | |
| Functional safety related parameters | ||
| MTTFd | 700 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Operation indicator | LED green, flashes in case of short-circuit | |
| Function indicator | LED yellow, lights up with receiver lit | |
| Control elements | Sensitivity adjuster, light/dark switch | |
| Electrical specifications | ||
| Operating voltage | 10 … 30 V DC , class 2 | |
| Ripple | 10 % | |
| No-load supply current | < 35 mA | |
| Protection class | II , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 | |
| Output | ||
| Switching type | light/dark on, switchable | |
| Signal output | 1 NPN output, short-circuit protected, reverse polarity protected, open collector | |
| Switching voltage | 30 V DC | |
| Switching current | max. 200 mA | |
| Voltage drop | ≤ 2.5 V DC | |
| Switching frequency | 500 Hz | |
| Response time | 1 ms | |
| Compliance with standards and directives | ||
| Directive conformity | EMC Directive 2004/108/EC | |
| Standard conformity | ||
| Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 | |
| Standard conformity | ||
| Standards | EN 60947-5-2 | |
| Approvals and certificates | ||
| UL approval | cULus Listed, Type 1 enclosure | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
| Storage temperature | -30 … 70 °C (-22 … 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | M12 connector, 4-pin | |
| Material | ||
| Housing | brass, nickel-plated | |
| Optical face | plastic | |
| Mass | 60 g | |
